Customer Reviews
RapidTag Tagless Printer




Products 1-13 of 13
Show
1180-67 Transfer Adhesive Promoter
Price: $38.00
Availability: Stock
Triangle Ink Item #: TRI118067 -

    1180-67 Adhesive Powder is used in plastisol inks to promote adhesion. This powder can be used for both direct printing and transfers inks. When direct printing, this powder aids in obtaining good adhesion to nylon jackets and bags. When printing transfers this product can be used for adhesion on tight knit polyester fabrics. Product can be used in all Tri-Flex series colors, as well as, our transfer inks. The 1180-67 powder should be added 10-15% by weight to the plastisol ink and mixed well....

    Soft Hand Base
    Price: $32.00
    Availability: Stock
    Atlas Screen Supply (INK) Item #: AI000900 -

      Atlas Soft Hand Base is a clear base used to extend and soften most plastisol ink.  It will increase the flow of the ink and the hand. Use approximately 10%-20% to improve the hand.  The more added to the ink the more it effects the opacity.  Most inks are highly pigmented and can be reduced without it effecting the color. Please Note: The addition of Atlas Soft Hand Base reduces the bleed resistance of low bleed inks. ...

      Puff Additive puff, additive, ink
      Price: $76.93
      Availability: Stock
      Atlas Screen Supply (INK) Item #: AI0IA916 -

        Puff Additive can add a raised or puff effect when mixed with standard plastisol inks.  Add 10-15% by weight of the Puff Additive to standard plastisol ink.

        Anti-Bleeding Gray Blocker
        Price: $40.76
        Availability: Stock
        Atlas Screen Supply (INK) Item #: AI0SE9665 -

          Atlas Anti-Bleeding Gray is a bleed blocking ink that can be used as an underbase for  polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, or polyester/cotton blends High-pigmented, very opaque ink Very creamyPhthalate-free

          1110NP Curable Reducer non-pthalate, curable reducer, international coatings
          Price: $35.95
          Availability: Stock
          International Coatings Item #: IC1110 -

            1110 NP (Non-Phthalate) Curable reducer lowers the viscosity of plastisol inks without affecting the fusing characteristics. When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight. Please Note: 1110 reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

            1180-51 Curable Reducer Detackifier
            Price: $31.19
            Availability: Stock
            Triangle Ink Item #: TRI118051 -

              Tri-Flex 1180-51 is recommended for use with the Triangles white inks, this is formulated for reducing the viscosity of the white inks quickly with small amounts. This product will reduce both viscosity and tact in any ink, it is recommended not to exceed 10-15% by weight as the more you use it will have an effect on opacity of the ink. The recommended 10% will reduce the white’s viscosity with minimal loss of opacity. This product can also be used with the Tri-Flex...

              Atlas Curable Reducer
              Price: $26.55
              Availability: Stock
              Atlas Screen Supply (INK) Item #: AI0SE913 -

                Atlas Curable Reducer will lower the viscosity of plastisol inks without affecting the fusing characteristics.  It is recommended to use 1% to 10% by weight.  In order to maintain opacity it is also recommended to use the minimal amount possible.Please Note: Atlas Curable Reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

                3804 Low-Cure Additive low cure, ink, additive, international coatings
                Price: $42.78
                Availability: On Back Order
                International Coatings Item #: IC3804 -

                  3804 PF (Phthalate Free) Low Cure Additive lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149°C). Use the 3804 PF Low Cure Additive when printing onto temperature and color sensitive fabrics such as 100% polyester or non-woven polypropylene bags.  Recommended addition of 5% to 6% by weight. To obtain optimum performance, the additive must be thoroughly dispersed into the ink being modified. For use on 100% cotton, poly/cotton blends, and 100%...

                  500LF Quick Trans Additive
                  Price: $39.90
                  Availability: On Back Order
                  International Coatings Item #: 500 -

                    500LF Quick Trans Additive can be added to multipurpose plastisols to convert inks to a hot split or hot peel transfer ink. Add by volume, 1 part additive to 3 parts ink. Mix thoroughly. Excessive amounts of additive will reduce the opacity of the mixed ink.

                    Transfer Powder
                    Price: $39.99
                    Availability: Stock
                    Item #: TP2 -

                      Atlas Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Atlas Transfer Powder over entire image, hold paper by edge and allow excess powder to fall off.  Tech Sheet Size: 2.5lbs Container ...

                      3802 Foil Resist foil, resist, ink
                      Reg: $47.92
                      Sale: $35.94
                      Availability: Stock
                      International Coatings Item #: IC3802 -

                        3802LF Foil Resist Additive can be mixed with most standard plastisols to make the ink resist foil during application of the foil in a heat press.  Add a maximum 10% to 15% by weight. For best foil application results, it is important to heat apply foil within 24 hours of printing and while the print is warm.

                        7043 Guardian Gray guardian, gray, 7043, international coatings
                        Price: $41.65
                        Availability: On Back Order
                        International Coatings Item #: IC7043 -

                          7043 Guardian Gray is a bleed blocking non-phthalate plastisol underbase for use on 100% polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, polyester/cotton blends, and sublimated dyed fabricsHigh-pigmented, very opaque ink Very creamy, short bodied ink, with low tack for ease of printing Cures between 275°F-325°F for 1 minuteNon-Phthalate ...

                          720 Softhand Clear Base soft hand, modifier, clear base, international coatings
                          Price: $35.86
                          Availability: Stock
                          International Coatings Item #: IC720LF -

                            720 Softhand Clear Base is a super clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. How to Use 720 Softhand Clear 720 Softhand Clear Base can be added to the 700 Series, Multipurpose, 1100 Series, 7600 Series and 800 Series inks for improved hand, cost and printability. 720 is very clear and is highly recommended for extending any process color, especially the Pro-Brite™ Process Colors. For a...

                            极速赛车开奖预测 秒速赛车计划网址 秒速飞艇开奖号码 澳洲幸运10软件 澳洲10群 澳洲幸运5冷热号统计 极速飞艇计划 秒速赛车精准计划网站 秒速飞艇在线预测 极速飞艇开奖app